Filter
Top Products
Sew in a Zipper:
Set the Machme
St=tch selector
Top thread tenstot_
control 3 tO 6
Stitch length
12
ot openmg
Top edge of fabric
Fabric Preparation:
Put the top sides of the fabric together
and sew to the end of the zipper
opemng, Use the reverse to iock the
stitches.
Sew the zipper opening wroth stitch
length at "6" and top thread tension
at "3",
To Sew:
1.
Zipper tape
Fold back the left seam allowance
as shown.
2, Turn under the r_ght seam allow-
ance to form a 1/8" fold,
3. Place the z_pper teeth next to the
1/8" fotd and pin m place,
4.
To sew the left side of the ztpper,
set the zipper foot on the left side
of the needle.
5, Lower the zipper foot on the right
s_de at the bottom of the zipper
so that the needle pierces the fold
and the zipper tape.
6. Sew through the fold and the zip-
per tape to the point where the
slider begins,
7, Lower the needle to hold the fab-
ric and raise the presser foot.
41