Filter
Top Products
SECTION 2. PREPARE YOUR MACHINE FORSEWING
\
Right needle threactension dia
J
_-_ Insert the thread between tension discs from
the right. Then pul both sides of thread.
Thread take up
lever thread guide
±
÷
Rig_lt needle
thread guide
(_ (_ Turn the hand wheel toward you to bring
needle bar to its higllest oosition, then pass
the thread through right needle thread
guide and thread take-up lever thread guide.
Needte threaa
uide
Needle par
thread guide
t/
® Pass the thread through needle thread guide
sliding the thread from left to right.
(_ Pass through needle bar thread guide from left
to right.
® Thread the right needle from tne front to the
back and Dull the thread about 10 cm {4"1
from the eye of the needle to the back under
the foot.
NOTE: Needle may be easier to thread if you
remove oresser foot (See page 27) and
lower the knife [See page 29).
15