Filter
Top Products
Set Up the Machine
Plug in the Machine and Switch on the Power
Power supply plug Power
Power \_ _-_/supply
switch _ Ll_J_I
\-
NOTE:
t.
2.
3.
Plug
connector
Machine
plug
Before inserting the plug into your
machine, be sure the power switch is
OFF.
Check your outlet to be sure it is a 110 to 120
Volt AC outlet,
Insert the machine plug into the three-prong
outlet, as shown. It will only fit one way,
Insert the power supply plug into the outlet.
SECTION _2. PREPARE YOUR MACHINE FOR SEWING
Power switch
Foot Control Use
Sewin_ liqht
4. Push the light and power switch to turn
on the power and sewing light.
The foot control regulates the speed at
which you sew.
SAFETY FEATURE:
Your machine will not operate unless the
light/power switch is turned on. If you are
interrupted or stop sewing, turn off the
light/power switch to prevent injury to
NOTE:
children.
OPERATING INSTRUCTIONS
"For appliances with a polarized plug (one blade wider than the other),
To reduce the risk of electric shock, this plug is intended to fit in a
polarized outlet only one way, If the plug does not fit fully in the outlet,
reverse the plug. If it stilldoes not fit, contact a qualified electrician to install
the proper outlet. Do not modify the plug in any way."
To increase speed, gently press down with
the ball of your foot.
To decrease speed, release your foot pres-
sure slightly.
The foot control is sensitive and
will increase or decrease your
sewing speed immediately.
Practice on a scrap of fabric to
regulate your sewing speed to
your taste and needs.
"Foot Controller Model YC-482P or YC.530 for use with Sewing Machine Models
385.1778x x x, 385.1684x x x, 38&1584x x x, 385.1664 xx x, 385.1754 x x x, 385.17526x x x,
385.1764x x x, 385.1884x x x, 385.17928 x x x, 385.17924 x x x, 385.18836 x x x,
385.17922x x x, 385.16816x x x, 385.17822x x x, 385.17828 x x x, 385.18830 x x x and
385.17026x x x.
x x x - represents numbers 00O through 999."
(For U.S.A. market only)
5