Filter
Top Products
SECTION 5. CARE FOR YOUR MACHINE"
Replace the Light Bulb Clean the Bobbin Holder
Lh_plug the machine and open the
{;_cP covPr
CALITION I The hght bulb will be
HOT Protect yotlr
fill(l(!1 _ when %/O11
handle _t
Ptl,h the bulb tip and turn the
l)tllb [:otirlter clockwise to remove
it
Put the new btdb in by pushingit
up arid ttlt[)if_g tt clockwise.
To insure that your machine operates at its best, you need to keep the
essential parts clean at all times.
The bobbin area can attract dust and lint. Your machine can become sluggish
or knock loudly if a thread is caught.
f
cover Dlate
Follow these directions:
I. Turn off the power or unplug the
machine,
2. Remove the bobbin cover plate by
firmly pulling it toward you.
3 Remove the bobbin.
4. Brush or vacuum the dust and lin_
out of the bobbin holder
5. Replace the bobbin.
B Slide on the bobbin cover plate h¥
pushing _t into the grooves.
58