Filter
Top Products
SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Know What the Presser Feet Will Do
• Check Your Presser Foot
Tile Presser feet are an important feature of this machine. You need to know
what each foot does in order to use thefn effectively.
Your presser foot is held in place by a Foot Holder. Each presser foot merely
snaps on the foot holder, which is seldom removed.
If vou need to remove or attach the foot holder, here is what you do:
• Change the Presser Foot
Use the correct presser foot for the stitch you wish to sew. Consult the
Stitch Pattern Chart and the detailed directions for sewing with the various
presser feet.
To Remove: To Attach: To Snap Off:
To Remove:
Turn the screw toward the back of
the machine. Use the large screw
driver.
To Attach:
1. Match the hole in the foot
holder with the threaded hole in
the presser bar.
2. Fit the foot holder screw into
the hole.
3. Tighten the screw by turning it
toward you.
1. Raise the needle bar to its highest position by turning the hand wheel .
toward you.
2. Raise the presser foot.
3. Press the snap-on button on the hack of the foot holder• The presser
foot will drop off.
10