Filter
Top Products
installation Step 3
Attach the T=rai! to the Header Bracket
--Header Wall
Header
Bracket
Cable
Pulley
Bracket
• Position the opener on the garage floor below the
header bracket. Use packing material as a
protective base.
if the door spring is in the way you'll need help.
Have someone hold the opener securely on a
temporary support to allow the T-rail to clear the
spring.
• Position the cable pulley bracket against the header
bracket.
• Align the bracket holes and join with a clevis pin as
shown.
• Insert a ring fastener to secure.
Clevis Pin
5/16"x2-3/4 "
Ring Fastener
Header Bracket b
i
Cable
Pulley
Bracket
T-rail _
Garage
Door
Temporary
Support
Hardware Shown Actual Size
O
Clevis Pin
5/16"x2-3/4" Ring Fastener
15