Filter
Top Products
11
· QUIET THREE SPEED FAN
· AUTO MODE CYCLES OZONE OR ANION (ION GENERATOR) ON AND OFF
AUTOMATICALLY
· MANUAL MODE AUTOMATICALLY DEFAULTS TO ANION FEATURE AFTER 2
HOURS
· 2 OR 4 HOUR TIMER MODE OPERATES UNIT FOR 2 OR 4 HOURS AND THEN
SHUTS OFF AUTOMATICALLY
· OZONE GENERATOR (USED FOR RAPID ODOR REMOVAL AND SURFACE
STERILIZATION)
· ANION - NEGATIVE ION GENERATOR (NEGATIVE IONS CAUSE THE FLOATING
PARTICULATES TO CLING TOGETHER, FORMING A MASS WHICH DROPS
THEM TO THE FLOOR TO BE SWEPT UP)
· STERILIZE (UV LIGHT HELPS REDUCE AIRBORNE GERMS AS THEY PASS
THROUGH THE UNIT)
· HELPS REDUCE SMOKE AND ODORS FROM YOUR HOME, OFFICE, CAR, BOAT,
RV, ETC...
· REDUCES MOLD, MILDEW AND BACTERIA
· REPLACEABLE UV LAMP
· WIRELESS REMOTE CONTROL OR MANUAL OPERATION VIA FRONT PANEL
CONTROLS
· WASHABLE PRE-FILTER
· WASHABLE HEPA FILTER
· DIGITAL DISPLAY WITH SLEEP MODE (THE BACKLIGHT TURNS ITSELF OFF
AFTER ADJUSTING SETTINGS)
· IMPROVES INDOOR AIR QUALITY
· USES STANDARD HOUSEHOLD CURRENT
1. Remove unit from shipping carton.
2. Check for shipping damage and loose or broken parts.
3. Remove any protective materials from the outside of the unit.
4. Remove the filter panel on the right side of the machine and make sure the plastic
cover has been removed from the filter.
5. Read Owner’s Manual thoroughly prior to operating or servicing the unit.
6. Insert the battery into the remote by sliding the battery compartment open and placing
the battery with the positive side (+) facing the bottom of the remote.
7. Determine placement location for the unit.
We recommend placing it up higher if
possible. A securely fastened wall shelf would be an ideal location.
8. Plug the unit into an unused power outlet.
INSPECTION & INSTALLATION
FEATURES
I-4506 BR7580R-1 6/25/07 7:57 AM Page 17