Filter
Top Products
Roses Escutcheons
Knobs/Levers
ABLN
All levers, except 93 • • • •
93 Lever • • •
41, 42 Knobs • • • •
Mediterranean see note •
23
SERIES
L
Note: Schlage order forms are available at no charge by contacting your Schlage Representative or Customer Service.
How to Order
To order Schlage products, descriptive data should be in the same sequence as shown.
Line Outside Inside Door
Item Des Fin Des Fin Thickness
12 3 45678 9 10 1112 13
Product
Qty
Hand
Strike Additional Details
Dim
Ext
Line Outside Inside Dr
Item Des Fin Des Fin Thk
1 50 L9453P 03A 626 RH
2 50 L9453P 03A 626 LH
3 50 L9040 03A 626 625 RH
4 50 L9040 03A 626 625 LH
5 50 L9456R 07L 605 RH
6 50 L9456R 07L 605 LH
Product
Qty
Latch
Hand
Strike Additional Details
Dim
Ext
EXAMPLE
8. Hand of door. Only one
hand allowed per line item.
Example: RH=Right Hand,
LH=Left Hand, RR=Right
Reverse, LR=Left Reverse.
9. Strike. Leave blank for stan-
dard or specify part num-
ber if non-standard strike
is required. LLL=Less
Strike.
10. Door Thickness. Enter door
thickness if non-standard.
Example: 138=1⅜,
214=2¼, 212=2½.
11. Extension. Enter one of
the following when doors
2 thick or greater are
specified:
EE = Extended Equally
EI = Extended Inside
EO = Extended Outside
ED = Extended Differently
EI or EO assumes the latch
will be centered on a 1¾
door, to which material has
been added.
12. Enter dimension for non-
standard strike lip length
and mortise cylinder or
blocking ring length.
012 = ⅛ 118 = 1⅛
018 =
₃
⁄₁₆ 114 = 1¼
025 = ¼ 138 = 1⅜
031 =
₅
⁄₁₆ 112 = 1½
037 = ⅜ 158 = 1⅝
050 = ½ 134= 1¾
078 = ⅞ 200 = 2
100 = 1 400 = 4
13. Enter detail for keying
information and for special
requirements.
1. Line item number
2. Quantity
3. Complete lock product or
part number
4. Outside design code*
5. Outside finish code
6. Inside design code. Leave
blank if same as outside
design code.
7. Inside finish code. Leave
blank if same as outside
finish code.
* To specify complete design, combine the numeric knob or lever design with the alpha rose or escutcheon design. Example: 03L, 93A, 42B.
When ordering Mediterranean design levers with L escutcheons, specify AST/00L, AVA/00L or MER/00L. Use the chart below for trim options.
Note: The Mediterranean rose is shown on page 5 and there are no
other rose options for Mediterranean levers.