21
SERIES
L
Armored Fronts
L-Series armored fronts are produced from brass, bronze
or stainless steel material, finished to match lock trim and
furnished complete with screws. Numbers for ordering
separately or with locks are listed below. Armored fronts
are specified in latch column of order form.
Standard Square Corner
1
¹⁄₄” (32mm) Width
Armored Fronts
Square Corner
Description
1¹⁄₄” 1¹⁄₁₆”
(32mm) (27mm)
Width Width
09-662 09-668 Latch: L9010, 9040
09-663 09-669 Latch x auxiliary latch: L9050, L9060, L9070, L9080, L9082
09-664 09-670 Latch x deadbolt: L9456, L9465, L9466, L9473
09-665 09-671 Deadbolt: L9460, L9462, L9463, L9464
09-666 09-672 Latch x auxiliary latch x deadbolt: L9453, L9485, L9486
09-661 09-667 Blank (no holes): L9175, L9176
Note: For 1³⁄₈” (35mm) doors, 1¹⁄₁₆” (27mm) armor must be specified if required.
Strikes
All L-Series strikes are produced from brass, bronze or stainless
steel material, finished to match lock trim, and are furnished
complete with screws. Numbers for ordering separately or with
locks are listed below.
Plastic Strike Box
K510-066
1
¹⁄₄” x 4³⁄₄” x 1³⁄₁₆” Deep
32mm x 121mm x 30mm
Standard Square Corner
10-072
1
¹⁄₄” x 4⁷⁄₈” x 1³⁄₁₆” Lip
32mm x 124mm x 30mm
Wood Frame Reinforcer
37-015
Armor Strike
10-091
1
¹⁄₄” x 8” x 1³⁄₁₆” Lip
32mm x 203mm x 30mm
Available for wood door jamb
reinforcement. Furnished
when specified.
Strikes
Number Lip Length Description
1³⁄₁₆” (30mm) Standard
10-072
⁷⁄₈” (22mm), 1” (25mm),
Optional
1¹⁄₂” (38mm)
1³⁄₄” (44mm), 2” (51mm) Special lip
10-073 No lip For deadbolt lock
10-075 No lip
¹⁄₂” (13mm) Rabbeted
(use with 1¹⁄₁₆” (27mm) armor)
10-091* 1³⁄₁₆” (30mm) Armor front
K510-066 – Strike box, plastic
*Specify hand of inactive door.