Filter
Top Products
3
Specifications
Handing:
All D-Series lever locksets are non-handed.
Door Thickness:
1⅝˝to 2⅛˝(41mm–54mm) standard including
Vandlgard
®
functions. 1¾˝- 2˝ for function D85.
See accessories (Page 11) for spacers required
for 1³
⁄8˝ doors.
Backset:
2³⁄₄˝ (70mm) standard. 2³⁄8˝, 3¾˝and 5˝ (60mm, 95mm,
127mm)
optional.
Faceplate:
Brass, bronze or stainless steel. 1⅛˝ x 2¼˝
(29 mm x 57mm) square corner, beveled.
Lock Chassis:
Zinc plated for corrosion resistance.
Latch Bolt:
Steel, ½˝ (12mm) throw, deadlocking on keyed and
exterior functions. ³⁄₄˝
(19mm) throw anti-friction latch
available for pairs of fire doors.
Exposed Trim:
Levers: Pressure cast zinc, plated to match finish symbols.
Roses: Solid brass.
Strike:
ANSI curved lip strike 1¼˝ x 4⅞˝ x 1³⁄₁₆˝ lip to center
standard. Optional strikes, lip lengths and ANSI strike
box available. See page 10.
Cylinder & Keys:
6-pin Everest C123 keyway standard with two patented
nickel silver keys per lock.
Keying Options:
Interchangeable core and Primus
®
high security cylinders.
Master keying, grand master keying and construction
keying.
Warranty:
Seven-year limited for all functions including
Vandlgard
®
.
Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1
Accessibility Code.
Federal
Meets FF-H-106C Series 161.
California State Reference Code (CSFH)
(Formerly Title 19, California State Fire Marshal Standard)
All levers with less than ½˝ (64mm) returns comply;
levers return to within ½˝ of door face.
MEACertification
All electrified locking (fail-safe, unlocked by switch or
power failures) functions accepted for use in New York
City by the City of New York, Department of Buildings
(MEA 24-04-E).
All levers with less than ½˝ (64mm) returns comply with
California Fire Safety Codes.
3/4˝ and 1/2˝ throw latch approved for Hurricane
Resistance with Miami-Dade County, Florida and
the Florida Building Commission.
UL / cUL:
All locks listed for A label single doors, 4´ x 8´.
Letter F and UL symbol
Door Preparation
2-1/4"
57mm
2-3/4"
70mm
5/16" dia.
8mm
1" dia
25mm
2-1/8"
54mm
1-1/8"
29mm
2-3/4"
70mm
Lever Designs