Filter
Top Products
Door Handing
All Schlage
®
locks are reversible. Hand information is
necessary to ensure proper finish of latchbolt and strike
for split-finish locks. Follow the diagram to determine
the hand of the door. The outside is the secure side or the
corridor side.
LH
Left Hand
INSIDE
OUTSIDE
OUTSIDE
INSIDE
LRB
Left Hand
Reverse Bevel
RH
Right Hand
RRB
Right Hand
Reverse Bevel
11
DC Power Source – EL or EU
Switch
(Not Furnished)
Transformer
(Not Furnished)
Typical Wiring Diagram for Electrified Locks
AC Operation
Rectifier
To Lock
Plug
Rectifier used on AC operation unit only.
.35A @ 24V (Current requirements per lock)
24V AC 115V AC
Switch
(Not Furnished)
DC Operation
To Lock
.15A @ 24V (Current requirements per lock)
AC and DC Application
Solenoid
Rectifier
Cut as close to plug as
possible for DC operation.
Plug into solenoid
for AC operation.
Discard for DC operation.
24V DC
AC Power Source – EL or EU
1-3/8˝D-Series Lever Door Spacer*
Accessories
XN12-012
*For installation on 1
C\, ” doors, two (2) spacers are required. Specify finish.