Filter
Top Products
10
2C\,˝
1Z\, ˝ (29mm) x 2Z\v˝ (57mm) square corner 14-047 –
60mm 1” (25mm) x 2Z\v˝ (57mm) square corner 14-048 –
1Z\, "(29mm) x 2Z\v" (57mm) square corner 13-047 13-048
2C\v˝
1Z\, ˝ (29mm) x 2Z\v˝ (57mm),
C\v˝ (19mm) throw for pairs of fire doors
3C\v˝
1Z\, ˝ (29mm) x 2Z\v˝ (57mm) Square corner 14-028 14-010
Deadlatch
Springlatch
C\v” Throw Anti-Friction Deadlatch for Pairs of Fire
Doors
Latches
Backset Description
Deadlatch Springlatch
Z\x˝Throw Z\x˝
70mm
95mm
Reinforcement
Sleeve
Long Backsets
D-Series locks with 5˝ backsets are normally furnished with
1⅛˝ faceplates and 1˝ housings. Links installed in metal doors
require one A501-567 sleeve and 43-005 (order separately) to
join latch and link.
Sleeve (A501-567)
(add to
2
C\v”
backset
latch)
1
3
/4˝ doors (A501-566) or
1
3
/8˝ doors (A501-565)
Door Reinforcement
Schlage 37-001 reinforcing kit is used to
reinforce and help prevent the collapse of
hollow metal doors when locksets are
tightly mounted.
This kit should be used with long backsets for D-Series lock
installations in hollow metal doors to prevent lateral
movement of the latchbolt. Specify door thickness, 1⅜˝
or 1¾˝, when ordering reinforcement kits.
Reinforcement Kit
(37-001)
14-042
_
(A501-567)
Strikes
All Schlage strikes are furnished complete with screws.
The standard D-Series strike has a 1³⁄₁₆˝ lip.
When ordering separately specify quantity, product number,
finish, and lip length. Standard strikes are shown in bold type.
Square Corner Box Strike
(10-013)
1
1
/
8
˝
x 2
3
/
4
˝
x
3
/
32
˝
ANSI Strike–Standard
(10-025)
1
1
/
4
˝
x 4
7
/
8
˝
x
3
/
32
˝
Rabbeted Latch
and Strike Kit
(39-030)
Rabbeted Latch and Strike Kit
Rabbeted latch and strike kit finishes: 605, 626.
This kit adapts square corner latches and 2
3
/
4
˝ (28mm) high
strikes for ½
˝ (13mm) rabbeted door and frame preparations.
Strikes
Number Lip Length Description
10-013 1
1
/8˝ (28mm) 1
1
/8˝ x 2
3
/4˝ (28mm x 70mm) Square corner, box
1
3
/4˝ (38mm)
10-016 1
1
/8˝ (28mm) 1
1
/8˝ x 2
3
/4˝ (28mm x 70mm),
3
/4˝ (19mm) deep
box for 14-042 fire door latch
10-025 1
3
/16 ˝ (30mm) 1
1
/4˝ x 4
7
/8˝ (32mm x 124mm) ANSI
1
3
/8˝ (35mm)
K510-066 — Box for 10-025 ANSI strike
Latches
D-Series latches are adjustable for flat or beveled edge doors.
Latches and strikes are furnished in brass, bronze, or chrome
finishes to be compatible with lock trim. When ordering,
specify quantity, part number, and finish. All D-Series latches
have ½˝ throw and 1˝ housings except 2⅜˝ backset latches,
which includes sleeve G506-815 to fill a 1˝ edge bore.
Standard latches are shown in bold type.
G506-815
Extension
Link
(43-005)
2-3/4˝ Latch