Sanyo SC-X90 Vacuum Cleaner User Manual


 
Install the wand to the hose.
To achieve maximum reach with the attachments,attach the crevice tool to the end of the wand.
Securely and firmly connect the wand to the hose while twisting the wand, as shown in the
illustration below.
The upholstery tool & dusting brush can be attached directly to the wand, hose or the end of the
crevice tool. Refer to the illustration for the correct way to position the upholstery tool &
dusting brush.
The end of the wand which has the marking of should be connected to the hose.
USING THE ATTACHMENTS
Caution: When using the attachments during cleaning, set the vacuum
cleaner to the upright position.
Disconnect the hose from the vacuum
cleaner.
Pull the hose gently in the direction of
the arrow to disconnect it.
Upholstery tool & Dusting brush
To detach the dusting brush from the upholstery tool: Press the
tabs on the brush downward to remove it.
To reattach the dusting brush to the upholstery tool: Insert
the front of the upholstery tool under the hook on the front of the
dusting brush. Press down on the back of the upholstery tool to
snap it into place under the dusting brush tabs.
1
4
Tabs
7
Hose
2
Hook the hose holder onto the
holder mount.
Caution:
Before using the attachments,
please make sure the hose is
hooked on the holder mount.
Remove the wands from the
vacuum cleaner.
Two wands are contained together.
Pull out the second wand as shown.
Caution:
3
When removing the attachments,pull
them in the directions shown in the
illustration.Pulling them in the wrong
direction or pulling them forcefully may
cause damage to the attachment ribs.
Holder
Mount
Hose
Holder
Crevice
Tool
Wands
1
2
Second
Wand
Hose
Wands
Upholstery
Tool
Crevice Tool
Crevice Tool
Dusting Brush
Crevice Tool
Wand
Hose