Sanyo SAP-K18AP Air Conditioner User Manual


 
4. OPERATION OF WIRELESS REMOTE CONTROL UNIT
8
When you press the buttons on the remote control unit, the
mark appears in the display to transmit the setting changes to
the receiver in the air conditioner.
Information on the operating conditions is displayed while the
remote control unit is switched on. If the unit is turned off, only
CLOCK and TEMP was displayed.
: Press the (+) button to increase set temperature, continue
press 2 seconds for fast increasing set temperature.
: Press the (-) button to reduce set temperature, continue
press 2 seconds for fast reducing set temperature.
This button is for turning the air conditioner ON and OFF.
Transmitter
Display
(+) / (-) setting
buttons
ON/OFF operation
4.2 Remote Control Unit (Functions)
Display
TEMP. setting button
ON/OFF operation button
TIMER ON button
TIMER OFF button
Signal Transmitter
MODE operation button
FAN SPEED Selector button
SLEEP button
CLOCK button
SWING button
: The air conditioner starts at the set time.
: The air conditioner stops at the set time.
To select “AUTO” “COOL”, “DRY” or “FAN” mode.
TIMER ON button
TIMER OFF button
MODE selector button
(DRY)
(COOL)
: When choosed this setting, the air conditioner calculates
the difference between the thermostat setting and the room
temperature and to select suitable running method.
: The air conditioner makes the room cooler.
: The air conditioner reduces the humidity in the room.
: The air conditioner run the indoor fan only.
: NOT function for cooling only model.
(AUTO)
(FAN)
(HEAT)
LOCK / UNLOCK
button
: Press the button at the same time to lock or unlock
wireless remote controller.
-
+
OPER
+
-
LIGHT button
TURBO button
BLOW button
TEMP button
Operation and Maintenance