Filter
Top Products
Additional Information
1. Power failure
When the power resumes after a power failure, the display shown on the above will appear (the colon of the
present time indicator “ : ” will blink).
To restart operation
1 Turn on the power (or the circuit breaker) for the air conditioner.
2 Turn on the air conditioner with the remote controller.
3 Press the PROGRAM button of the programmable weekly timer.
The colon ( : ) stops blinking, the clock display will appear and the ordinary indictor mode will resume.
Your program is saved with the backup, therefore you do not need to program again.
2. The operation of the programmable weekly timer and air conditioners
The operation of air conditioners with the programmable weekly timer can be controlled with the timer or the
remote controller.
OI-432-03 - 14EG
3 - 14
Ex. 1: Daily operation
Ex. 2:Weekly operation
8:00 12:00 12:40 15:50 17:00 19:00
ON OFF ON OFF ON OFF
Push Push Push Push
ON/OFF with the
programmable timer
ON/OFF with the
remote controller
ON/OFF button
Operation of air
conditioners
No programmed operation
(operation not reserved)
Programmed operation
No programmed operation
(operation is reserved, but canceled
due to a programmed holiday)
3
3 TM-SH80UG 5/2/01 3:21 PM Page 14