Filter
Top Products
5. How to set program operations
(Continued)
STEP 6 Press the PROGRAM button to complete the program setting.
Press the PROGRAM button within 30 seconds after you finish adjusting your desired ON-times and
OFF-times.
Above steps complete the program setting of operation for a day (Monday in the example).
Programmed ON-time and OFF-time are displayed when the present time is within a programmed
period.
(In the example, because the present time falls between the ON-time and OFF-time of the
PROGRAM 1, the PROGRAM 1 content is displayed.)
STEP 7 Take the steps 1 through 6 to set program operation for other days.
If you hope to set ON-times and OFF-times that are the same with those for another day which are
already programmed, refer to “7. How to duplicate programmed operation times.”
• ON-time and OFF-time adjustment
The time 0:00 is assumed to be equivalent to 24:00.
The programming shown below is acceptable.
ON-time Off-time
• While the ON-time or OFF-time indicator is blinking, if you have not pressed the DAY button, HH
button, or MM button within 30 seconds, the indicator resumes the indication not adjusted
(ordinary indicator mode). To set the program operation again, follow above steps from the
beginning.
NOTE
OI-432-03 - 9EG
3 - 9
3
3 TM-SH80UG 5/2/01 3:21 PM Page 9