Sanyo KHS1251 Air Conditioner User Manual


 
Remote Control Unit
NOTE
The illustration above pictures the remote control unit after the cover has
been lowered and removed.
Transmitter When you press the buttons on the remote control unit, the mark
appears in the display and the setting changes are transmitted to the
receiver in the air conditioner.
Display Information on the operating status is displayed while the remote control
unit is switched on. If the unit is turned off, only the mode that was set
previously is still displayed.
NIGHT SETBACK button For details, see “NightSetback Mode”. When you press this button in the
DRY, COOL or HEAT mode, the
mark appears in the display, and the
remote control unit automatically adjusts the set temperature to save
energy.
TEMP. setting buttons Press the
button to increase the temperature setting.
Press the
button to reduce the temperature setting.
ON/OFF operation
button
This button is for turning the air conditioner on and off.
TIMER ON button
ON
: The air conditioner starts at the set time.
TIMER OFF button
OFF
: The air conditioner stops at the set time.
TIMER ON button
Display
ON/OFF operation button
SET button
TEMP. setting buttons
1 HR. TIMER button
NIGHT SETBACK button
TIMER OFF button
Battery compartment
(Pull off the cover to expose the
batteries.)
FAN SPEED selector button
ACL button
MODE selector button
CANCEL button
1HR.
TIMER
ON
OFF
TEMP.
FAN SPEED
MODE
ON OFF
SET
CANCEL
NIGHT
SETBACK
ACL
BATTERIES
FLAP
SET TEMP.
ON
OFF
1
HR.
H
(Cover closed)
Transmitter
FLAP button
8 OI-202-10EG
oi202000
AB
ADDRESS switch