Filter
Top Products
E-5
Tabs
Filter
Supports
Pre-filter
Plastic Protector
FRONT
Filter
Filter
Pre-filter
Net
Filter
Supports
Pre-filter
Attachment
Slots
w
q
q
Release Button
Press
Press
Front Cover
w
e
Tabs
Front
Cover
q
Tabs
Tabs
Preparations Before Use
Installing the Filter
1
3
2
4
56
Note:
¡Always be sure to install the pre-filter, filter and front cover before operating the unit.
¡If the plastic protector is not removed from the filter, the device will not clean the air.
In addition, this may cause a malfunction.
¡Write the date of the filter installation on the date label as a guide for the filter replacement and
attach the label to the unit.
Remove the pre-filter (filter).
¡Hold the tabs of the pre-filter and pull to remove.
Remove the front cover
¡q Press the Release buttons (both sides) at
the bottom of the unit, w pull the front cover
away from the unit, and e lift.
Attach the filter to the pre-filter.
¡Insert the side printed with the word “FRONT”
into the side of the net.
Remove the pre-filter from the filter
and remove from the plastic protector.
¡Widen the frame of the pre-filter and remove
the filter.
Attach the front cover.
¡q Place the tabs (3) at the top of the front cover
into the attachment slots.
¡w Press the bottom until the cover clicks.
Attach the pre-filter.
¡Ensure that the tabs of the pre-filter are to the
front. q Insert the filter under the filter supports
at the top and then w push the filter in at the
bottom.
ABC-VW24A_GB_US.qxd 09.10.1 4:52 PM ページ5