Filter
Top Products
Maintain tools and lter _35
Maintain tools and filter
04 MAINTAIN TOOLS AND FILTER
CLEANING THE ROBOTIC VACUUM CLEANER
CLEANING THE DUST BIN AND THE FILTER
2. Separate the dust bin cover by pulling it in the direction of
the arrow in the figure.
1. Press the Dust Bin Eject (PUSH) button and pull the
dust bin to separate the dust bin.
First, empty the dust bin before cleaning it.
■
When separating the dust bin, take care not to spill the
dust out of the dust bin.
■
Empty the dust bin in the following cases.
1. When dust has accumulated inside the dust bin.
2. When the suction power suddenly becomes weak.
3. When the noise suddenly increases.
3. Separate the Filter from the dust bin by pulling it in the
direction of the arrow in the figure.
5. Install the Filter into the dust bin.
- Make sure that the grid pattern of the Filter is facing
downwards. It cannot be installed in the wrong direction.
4. Wipe the dust from the Filter and the dust bin.
✽ You can wash them with water.
6. Close the dust bin cover and install it into the main unit.
Filter
Dust Bin Cover
DJ68-00518G(SR8845)(EN)-0.0.indd 35 2010.2.9 2:53:48 PM