Samsung SR8845 Vacuum Cleaner User Manual


 
Operating the cleaner _21
Operating the cleaner
03 OPERATING THE CLEANER
INSTALLING THE ROBOTIC VACUUM CLEANER
INSTALLING THE CHARGER
Always keep the power cord of the charger
plugged into the power outlet.
- If no power is supplied to the charger, the robotic
vacuum will not be able to nd the charger and will
not be able to charge automatically.
- If the robotic vacuum cleaner is separated from the
charger, the battery is automatically discharged.
2. There should be no obstacles 0.5 m to the left and
right and within 1 m of the front.
1. Install the charger on a flat surface.
3. Install the charger in a location where it can be easily
accessed by the robotic vacuum cleaner.
4. Arrange the power cord along the wall.
5. When the floor is made of wood, install the charger
in the same direction as the grain of the wood.
Power Lamp
Charging Lamp
NOTE
about 1m
about 0.5m
about 0.5m
DJ68-00518G(SR8845)(EN)-0.0.indd 21 2010.2.9 2:52:34 PM