Filter
Top Products
Operating the cleaner _27
Operating the cleaner
03 OPERATING THE CLEANER
USING THE ROBOTIC VACUUM CLEANER
RECHARGING
1. Press the Recharging button.
- The main unit icon (
) is turned on and the robotic
vacuum cleaner will return to the charger.
2. To stop the robotic vacuum cleaner while it is
returning to the charger, press the (
) button.
3. To test the auto charge function, press the
Recharging button when the robotic vacuum cleaner
is less than 1.5 m from the charger.
You can have the robotic vacuum cleaner return
to the charger to charge the battery by using the
Recharging button.
■
When the robotic vacuum cleaner is operating, press
the (
) button to cancel the operation and press the
Recharging button.
Troubleshooting when the robotic vacuum cleaner
does not return to the charger
●
Check the installation of the charger
- When the charger is in a location where the charger
cannot guide the robotic vacuum cleaner to the
charger.
- When the charger is more than 5m away from robotic
vacuum cleaner.
: It may require a longer time for the robotic vacuum
cleaner to return to the charger.
● Manually charge the robotic vacuum cleaner in the following
cases.
- When the charger is installed in a corner.
- When the battery is fully discharged.
- When the robotic vacuum cleaner is trapped by an
obstacle (furniture etc.)
- When the robotic vacuum cleaner cannot pass over the
doorsill to the location where the charger is installed.
(The height of the doorsill should be about 1cm or less).
Using the remote
control
Using the main unit
buttons
1.5 m ahead
1.5 m ahead
DJ68-00518A (EN-1)-0.1.indd 27 2009.11.5 11:34:47 AM