Filter
Top Products
Eng-44
2) Move to ‘DHCP...’ by using
▲/▼
KEY in NETWORK ACCESS, then press ENTER
SWITCH to set to DHCP.
3) DNS 1 and DNS 2 will be automatically set to DNS as shown above.
Use
œœ
/
√√
KEY
to change it.
4) After setting, move to the main screen by using the MENU button.
5) Set values will be stored as shown below. It takes 2 or 4 seconds.
On completion of the DHCP setup, the screen, [D] is displayed.
If the network connection is cancelled or cut, [D] starts blinking.
6) You can view the video source of the SMO-211QN/SMO-150QN from a remote location
PC.
7) Make sure the remote PC meets the minimum specification requirements described in
Chapter 5. Each product feature (Eng-91) and make sure that the PC is internet capable.
06/01/03 13:14:00
DHCP ACCESS
DNS 1 168.126.63.001
DNS 2 168.126.63.002
06/01/03 13:14:00
NETWORK SETTING
[D] 13:14:00
CAM1