![](http://pdfasset.owneriq.net/c/fc/cfc613e4-49f6-4553-af05-d919a2633aca/cfc613e4-49f6-4553-af05-d919a2633aca-bg12.png)
Eng-18
After positioning the monitor and installing four cameras in the desired location, please
connect
the CAMERA to the MONITOR using the CAMERA CABLE (MCB-60) as shown in the
figure below.
Connection status checking method :
• Turn on the monitor after connecting cameras, and check if camera image is displayed.
The monitor's initial screen mode is quad.
•
In the monitor and the camera are not connected properly, OSD ‘L’(LOSS) will be
displayed on screen.