Filter
Top Products
COLOR DOME CAMERA SCV-2080
38
Troubleshooting
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
ú
Nothing appears on the screen.
Ķ
Check that the power cord and line connection between the camera and monitor are properly connected.
Ķ Check that you have properly connected BNC cable to the camera.
ú
The image on the screen is dim.
Ķ Is lens stained with dirt? Clean your lens with soft, clean cloth.
Ķ
Set the monitor or DVR to the proper condition.
Ķ
If the camera is exposed to very strong light, change the camera position.
ú
The image on the screen is dark.
Ķ Adjust the contrast feature of the monitor or DVR.
Ķ If you have an intermediate device, set the 75Ω / Hi-z properly.
ú
The camera is not working properly, and the surface of the camera is hot.
Ķ Check that you have properly connected the camera to an appropriate power source.
ú
The DAY/NIGHT menu does not work.
Ķ Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
ú
The SENS-UP function does not work.
Ķ Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
Ķ Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.
ú
Color is not correct.
Ķ Check the setting of WHITE BAL SETUP menu .
ú
The screen flickers continually.
Ķ Ensure the camera is not pointing towards the sun.
ú
When coaxial communication is not available:
Ķ Make sure that the camera and monitor are installed within the recommended distance.
Ķ
Use the video amplifier equivalent to coaxitron if the recommended installation distance is exceeded.
ú
The camera is out of focus.
Ķ Check that you have properly adjusted the zoom / focus adjustment lever of lens.
E
I
n
P
V
I
m
T
E
S
S
F
H
M
S
V
L
Z
F
A
P
P
O
E
O
S
B
D
G
W
S
M
P
3
D
D
C
S
F
C
E
O
S
M
W
D
ö