Filter
Top Products
Ventilating Your Room
If the air in your room is stale, you can air the room using the Fan feature.
1
If necessary, press the (On/Off) button.
Result: ◆
The air conditioner starts up in the mode selected when
the unit was last used.
◆ The unit beeps twice.
2
If you wish to discharge stale air, push the ventilation lever on the front of the
unit to the right and open position ( ).
Result: ◆
The air inside the room circulates and stale air is discharged
outside.
Otherwise, push the ventilation lever to the left and closed position ( ).
Result: ◆
The air simply circulates inside the room.
To set the fan speed:
◆
Press the HIGH, MED or LOW button on the remote control as desired.
or
◆
Press the Fan Speed button on the unit one or more times until the
desired Fan speed indicator lights up.
4
To control the direction of the air flow, refer to page 10.
5
If the FAN indicator is not lit on the unit:
◆ Press the FAN button on the remote control
or
◆ Press the Mode button on the unit one or more times until the FAN
indicator lights up
Result:
◆ The unit beeps each time you press the FAN/Mode button.
◆ The air conditioner starts up in Fan mode.
➢
◆ You can change modes at any time.
◆ When the air conditioner is in the Fan mode, the temperature
cannot be set or displayed.
◆ You cannot use Fan mode in the energy saving mode
3
Remote Control
Control Panel
E-9