Filter
Top Products
7. Clean the front panel with a soft cloth,
warm water, and a mild detergent. Rinse
and dry thoroughly.
6. Replace air filter in front panel and
replace the elastic band.
9. Wipe the control panel clean with a soft,
dry cloth.
10. Replace the front panel. Set bottom of
front panel on bottom spring clips. Then
press down on top edge of front panel
and push it onto unit until the tabs snap
into place.
11. Reconnect power cord to outlet.
Performing annual maintenance
Your ‘air conditioner needs annual mainte-
nance to ensure steady, top performance
throughout the year. Call the service com-
pany recommended by your dealer to:
l Inspect and clean the coils and conden-
sate water passages.
l Check fan.
The compressor and fan motor are sealed
and need no oiling. The expense of an
annual inspection is the consumer’s
responsibility.
OR
If you are familiar with electrical appliances,
you can do the inspection and maintenance
yourself. If you choose to do so, follow
these steps:
NOTE: Do not lift, push, or pull any white
beaded foam (expanded polystyrene) parts.
1. Disconnect power cord from outlet.
2. Remove the front panel. (See “Cleaning
the front panel and air filter” on page 7.)
3. Remove unit from the window.
Electrical Shock Hazard
Unplug power cord from outlet
before servicing.
Be sure no liquid gets into the motor,
electrical control box, or compressor
terminals.
Failure to follow these instructions
can result in death, electrical shock,
or serious injury.
Excessive Weight Hazard
Use 2 or more people to move and
install air conditioner.
Failure to do so can result in back or
other injury.
a
WITH QUESTIONS OR COMMENTS