Filter
Top Products
31
Appendices
Connecting a computer installed with the [VC-30HD RCS] dedicated remote-control
software to the USB connector of the VC-30HD enables you remotely control the unit
from your computer.
Download [VC-30HD RCS] from the following Roland website.
http://www.rolandsystemsgroup.net/
fig.RCS-screen.eps
USB output to the connected computer is possible even while receiving remote control from the
computer.
You can select the output bit rate of VC-30HD from your computer from below using this dedicated
remote control software. By default, the output bit rate is set to 25 Mbps.
• 25 Mbps, 35 Mbps, 50 Mbps, 8 Mbps, 12 Mbps, 18 Mbps
* The USB output is cancelled if 35 Mbps or 50 Mbps is selected as the output bit rate.
fig.kensington.eps
http://www.kensington.com/
About Remote Control
Security slot