Filter
Top Products
SECTION 9: PUMP INSTALLATION AND VENTING
33
FIGURE 15: Vertical Venting Configuration
Approved
Vent Cap
Approved
Thimble
2' (.6 m)
Minimum
Aluminized Tee
1" (2.5 cm)
P.V.C to drain
system in
accordance
with local
codes.
Drain Cap
Clamps
Flexible Boot
6"(1.5 cm)
20"(5.1 cm) for EP-300
Part Number Description Part Number Description
01330203 Tee, 4" (10 cm) Aluminized
91409403 Tube, Aluminized 4" (10 cm) dia. 10' (3 m)
01330204 Tee, 6" (15 cm) Aluminized
91409420 Tube, Aluminized 6" (15 cm) dia. 10' (3 m)
01331900 Damper Coupling, 4" (10 cm)
91412800 Flexible Boot, 4" (10 cm)
01335801 Elbow, 4" (10 cm) Aluminized 90°
91412801 4 - Flexible Boot, 1/2" (1.3 cm)
02718851 Drain Cap, 4" (10 cm)
91412802 Flexible Boot, 6" (15 cm)
02718852 Drain Cap Assembly, 6" (15 cm)
91901300 Boot Clamp, 4" (10 cm)
90502300 Vent Cap, 4" (10 cm) Metalbestos
91913703 Boot Clamp, 6" (15 cm)
90502302 Vent Cap, 6" (15 cm) Metalbestos
E0009356 Damper Coupling, 6" (15 cm)
90505600 Wall Thimble, 4" (10 cm)
T0100320 Elbow, 6" (15 cm) Aluminized 90°