Filter
Top Products
CGTH INSTALLATION, OPERATION AND SERVICE MANUAL
32
2. Route thermostat wiring between the thermostat
and the rear of the heater. Carefully staple the
wires so as not to damage them and to produce a
professional appearing installation.
3.Connect thermostat wires to the "THERMOSTAT
CONNECTION" (See Figure 31) on the rear sur-
face of the burner as follows:
A. Using an appropriate crimping tool, install the
female terminals (included in accessories
bag) on the two wires from the thermostat.
B. Push the female terminals on the male termi-
nals. The thermostat terminals are not polarity
sensitive.
FIGURE 31: Thermostat Installation Rear View
Thermostat
Connection
Wire from thermostat.
See Thermostat Instructions.