Rinnai RHFE-750ETR Indoor Fireplace User Manual


 
Rinnai Corporation RHFE-750ETR 5
Features
Direct Vent: Intake air is taken from the outside
and the combustion products are exhausted to the
outside. Therefore the furnace has no effect on the
quality of the indoor air.
Push Button Ignition: Only one push of the
STANDBY/ON switch is all that is required to
operate the heater.
Lock: The buttons on the remote control can be
locked to prevent any unintended operation.
Dual Timer: The appliance can be programmed to
operate at two separate periods during the day.
Pre-heat: The appliance will turn on before the
programmed ON time and begin raising the room
temperature to that of the programmed temperature
by the ON time.
Memory: The computer memory records preset
temperatures, timer programming, and, operational
modes.
Remote Control: The appliance has a fully
functioning cordless remote control.
Auto-Off Function: You have the option of having
the flame display remain on or off once the room
temperature reaches the temperature setting.
See the installation instructions for the parts list of the
vent kit.
The “A” Vent Kit is included with the appliance.
The following flue manifold sizes are available:
Name Kit No. fits walls
A Vent Kit FOT-203 4 1/3 - 9 1/2 inch (110 - 240 mm)
B Vent Kit FOT-204 9 1/2 - 15 3/4 inch (240 - 400 mm)
Flue Manifolds
35 7/16 (900)
2 15/16 (71)
27 9/16 (700)
10 13/16 (274)
23 5/8 (600)
B
B
14 1/2 (369)
25 13/16 (655)
26 3/4 (679)
17 13/16 (453)
3 5/16 (84)
33 3/16 (842)
2 1/4 (57)
21 5/16 - 23 5/16 (542 - 592)
15 3/4 (400)
GAS CONNECTION
14 7/8 (378)
FLUE CONNECTION
4 15/16 (126)
33 3/16 (842)
Dimensions