Filter
Top Products
Installation & Servicing Instructions Rinnai E-Series
3
Content
1 Safety and general instructions 4
1.1 Designated use 4
1.2 Hazard denitions 4
1.3 Symbol denitions 4
1.4 The following instructions must be followed 5
1.5 Follow these instructions for the space heating water 6
1.6 Tools, materials and additional equipment 6
1.7 Relevant Installation, Service and User manuals 6
1.8 Disposal 6
2 Regulations and guidelines 7
3 Description of the boiler 8
4 Packaging and transportation 9
4.1 Scope of delivery 9
4.2 Transportation 9
5 Installation 10
5.1 Requirements for the installation room 10
5.2 Fitting the boiler 11
5.3 Dimensions 12
5.3.1 Plumbing kits 14
5.3.2 Clearances from appliance 15
5.4 Technical specications 16
6 Connecting the boiler 17
6.1 Central heating system 17
6.1.1 Plumbing Kit installation 18
6.1.2 Safety valve 19
6.1.3 Low water cut off 20
6.2 Expansion tank 20
6.3 Underoor heating system (plastic pipes) 21
6.4 Gas supply connection 21
6.4.1. Gas connection with natural gas 22
6.4.2 Gas connection with propane gas 23
6.5 Hot water supply 24
6.6 Condensate drain pipe 24
6.7 Vent system and air supply system 25
6.7.1 Intake / Exhaust Guidelines 25
6.7.2 Examples vent and air supply systems 26
6.7.3 Installation of the vent system 28
6.7.4 Recommended vent/air intake terminal position 29
6.7.5 Dimensioning of the exhaust and air intake duct 31
6.7.6 Combustion air and vent piping lengths 32
6.7.7 Calculation of compensation factor 33
6.7.8 Room Air System (outdoor combustion air) 34
7 Electrical connections 37
8 Boiler controls 40
8.1 Explanation of the function buttons 41
9 Starting up: Filling and de-aerating the boiler and installation 42
9.1 Requirements of the water system 42
9.2 Filling the heating system 43
9.3 Hot water supply 44
10 Adjustments 46
10.1 Altering adjustments 46
10.2 Activating factory settings (green button function) 49
11 Isolating the boiler 49
12 Commissioning 50
12.1 Testing for gas leaks 51
12.2 Testing the Ignition Safety shut off device 51
12.3 Checking for contamination 52
12.4 Checking of the zero pressure control 53
12.5 Checking the O
2
54
12.6 Measuring the ionization current 55
12.7 Installing the casing 55
13 Maintenance 56
13.1 Periodic examination of venting and boiler 56
13.2 Inspection 56
13.2 Maintenance activities 58
13.3 Warranty 60
14 Parts of the boiler 61
15 Blocks and errors 62
16 Other errors 86
17 Spare parts 92
18 Parts list vent system 102
19 Common venting guidelines 103
Appendix A Outdoor Reset Sensor Data 104