Rinnai 2424WC Water Heater User Manual


 
Model 2424WCwww.rinnaiamerica.com 14
In the case of any fault or error message from the Continuum 2424WC, first
turn all hot water taps off. Wait for 5 seconds. Turn the hot water tap back on. If
this does not correct the fault or eliminate the error message from the remote
control, press the priority button on and off twice to reset the system. If the error
message still remains, call your Rinnai Authorized Service Representative or Rinnai
at 800-621-9419.
DO NOT ATTEMPT TO SERVICE YOUR Continuum 2424WC YOURSELF.
Call a Rinnai Authorized Service Technician or call Rinnai at 800-621-9419.
Should overheating occur or the gas supply fail to shutoff, turn off the
manual gas control valve to the appliance.
Warning: Always turn off the electrical power supply, the manual gas valve
and the manual water control valve whenever servicing the unit.
The Continuum 2424WC should be checked by a Rinnai Certified
Technician once a year. A Rinnai Certified Technician should
perform any repairs that may be necessary.
The following items should be checked each inspection:
1) The area around the Continuum 2424WC unit should be free from combustible
materials such as cloth, vegetation and building materials. (see page 9)
2) Check burners for presence of foreign debris.
3) Remove and clean the inlet water filter.
4) Keep the appliance area clear and free from combustible materials, gasoline, and other
flammable vapors and liquids.
5) Do not obstruct flow of combustion and ventilation air.
MAINTENANCE & SERVICE INFORMATION