Filter
Top Products
Model 2424WCwww.rinnaiamerica.com 10
To operate the Continuum 2424WC simply turn
any hot water tap on, or initiate water flow
through the unit with a circulating pump. This
will automatically light the burner providing hot
water at the preset temperature. If the optional
remote control has been installed, the green IN
USE indicator will glow on the remote control.
Adjusting Temperature
2
The setpoint temperature of the Con-
tinuum 2424WC can only be adjusted by
the user using the Remote Control. To
adjust the setpoint temperature of the
Continuum 2424WC, all hot water taps
must be closed, and all circulating
pumps turned off.
1
Simply press the or button
until the required temperature is dis-
played on the Digital Monitor.
140°F
TEMPERATURE CANNOT BE
ADJUSTED WHEN ANY HOT
WATER TAP IS OPEN, OR
WATER IS FLOWING THROUGH
THE WATER HEATER.
CHECK LOCAL CODES FOR THE MAXIMUM
WATER TEMPERATURE SETTING ALLOWED
WHEN USED IN NURSING HOMES,
SCHOOLS, DAY CARE CENTERS, AND ALL
OTHER PUBLIC USE APPLICATIONS.
Rinnai recommends fixing the water heater
setpoint temperature at 108°F for ALL public use
applications.
BASIC OPERATION
The Remote Control will display the water
heaters current setpoint temperature.