Filter
Top Products
14
When the S8 device is in standby mode all keys remain lit. During therapy, the keypad
backlight turns off after two minutes of inactivity and the Start/Stop key dims.
HOW TO CHANGE THE SETTINGS
You can change settings on the S8 AUTOSET SPIRIT by using the keypad and LCD.
When the
S8 AUTOSET SPIRIT is in standby mode you can display a series of screens (a
menu) on the LCD screen in order to view and change the settings for a particular
function.
Your clinician will preset the menu to either a standard view or a detailed view.
See “How to Use the Standard Menu” on page 17 and “How to Use the Detailed
Menu” on page 19 for more information.
HOW TO ENTER THE MENU SCREENS
When the S8 AUTOSET SPIRIT standby (RAMP or SETTLING) screen is displayed you
will see the word “menu” in the left-hand corner. To select an
S8 AUTOSET SPIRIT
menu, press the Left key.
HOW TO SCROLL THROUGH THE MENU
When you are in the menu, scroll through items by pressing the Up or Down keys.
HOW TO CHANGE A SETTING OPTION
When you have scrolled to the item you require:
1. Press the Left key (Change).
2. Press the Up or Down keys until you see the setting option that you require.
3. Press the Left key (Apply) to select the setting option.
If you wish to exit without changing the option, press the Right key (Cancel).
HOW TO EXIT OUT OF A MENU
Press the Right key (Exit). This will take you back to the standby (RAMP or
SETTLING) screen.
HOW TO EXIT OUT OF AN ITEM WITHIN THE MENU
Press the Right key (Exit).
RAMP AND SETTLING
If your clinician has set your S8 AUTOSET SPIRIT to CPAP mode, the RAMP screen is
displayed after the Welcome screen. If your clinician has set your
S8 AUTOSET SPIRIT to
AutoSet mode, the SETTLING screen is displayed after the Welcome screen.