Filter
Top Products
Stick the LP gas label over the natural gas part of the
appliance data label.
Connect the appliance to the gas supply. Check the
appliance is gas sound.
The gas pressure can be measured at one of the left
hand hotplate burner jets. Lift off a burner head. Fit the
pressure gauge to the jet. Turn on and light one of the
other burners with a match. Turn on and press in the
control knob for the burner with the pressure guage
fitted.
The pressure should be 29mbar for Butane and 37mbar
for Propane. After checking the pressure, turn the taps
off and replace the burner head.
Reassemble burner top, making sure it is reassembled in
the correct way on the burner body.