Filter
Top Products
17
power nozzle
™
assembly & operation
Assembly
a. Prior to using the Power Nozzle, follow
the Quick Start Guide on pages 8-9 to
prepare the Rainbow.
b. Insert the bottom wand with male end
into the opening located on top of the
Power Nozzle. Press downward until
button lock clicks.
Operation
a. Plug in the Rainbow.
b. Turn the Rainbow power switch to
HIGH mode.
c. On the hose handle, turn the Airow
Control Vent to FULL POWER.
d. To disengage from the upright position,
place your left foot on top of the Power
Nozzle. Next, grasp the wand assembly
and pull backward.
e. Squeeze the trigger on pistol grip hose
handle to activate the Power Nozzle.
Release trigger to turn Power Nozzle o.
Optional: Use the trigger lock switch.
(See page 7.)
f. Guide Power Nozzle slowly back and
forth over carpet with free and easy
strokes. Let the Power Nozzle and
Rainbow do the work.
g. To lock Power Nozzle into the upright
position, place your left foot on top of
the Power Nozzle. Next, grasp the wand
assembly and push forward until wand
system is fully engaged in locking tabs.
h. To disconnect the Power Nozzle from the
wand, place your foot on the foot release
above the pivot arm.
1
3
5
7
2
4
6
8
9