Quadra-Fire 844-4120 Electric Heater User Manual


 
January 3, 2007
Page 7Quadra-Fire · Topaz · 7009-113E
3
Appliance Location and Clearances
A. Selecting Appliance Location
NOTE:
· Illustrations re ect typical installations and are FOR
DESIGN PURPOSES ONLY.
· Illustrations/diagrams are not drawn to scale.
· Actual installation may vary due to individual design
preference.
When selecting a location for your appliance it is important to
consider the required clearances to walls (see Figure 3.1).
WARNING
Fire Risk
Provide adequate clearance:
Around air openings
• To combustibles
• For service access
Locate appliance away from traf c areas.
Fire Risk.
Locate and install appliance to all
clearance speci cations in manual.
WARNING
B. Clearances
Figure 3.1
Model ABCDEFG
Topaz
Inches
6-1/2 6 1 54 36 40 23
Millimeters
165 152 25 1372 914 1016 584
NOTE: Flooring beneath appliance may reach 90 degrees
plus room ambient temperature. Check with flooring
manufacturer for maximum temperature allowed on flooring
surfaces.
It is permissable to place the appliance on carpet.
CAUTION
Some carpet materials may be sensitive to radiant heat from the
appliance causing discoloration or odor.
Fire Risk.
Odor Risk.
Tipping Risk
Install appliance on a stable, level platform/
oor strong enough to support appliance
without tipping.
• USE wood ooring, ceramic tile, brick hearth
or high pressure laminate ooring applied
directly over the sub- ooring material.
WARNING
E
A
C
D
F
A
C
G
A
A
B