Filter
Top Products
Light Sources (cont.)
TS-425 30 Watt Tungsten-Halogen Light Source with housing, power supply, mounting flange, and
light collection mirror. Provides output from 350nm to >2.0µm
TS-428 250 Watt Tungsten-Halogen Light Source with housing, AC power supply, mounting flange,
variable brightness control and light collection mirror. Provides output from 350nm to
>2.0µm.
TS-428-DC Same as TS-428 with Regulated DC Power Supply .
TDS-429 Dual Light Source with 30 watt deuterium & 30 watt tungsten-halogen lamps. Includes
housing with light collection mirror, mounting flange, and power supply. Provides combined
output from 190 to >2.0µm.
XS-432 75 Watt Xenon Light Source includes power supply, housing, mounting flange and light
collection mirror. Provides continuous spectral output from 190nm to 750nm and declining
continuum out to 2.6µm.
IS-434 Infrared Source for wavelength region 2.6-16 microns includes silicon carbide resistor,
housing, mounting flange, light collection mirror and power supply.
Detectors and Accessories
PD-438 Universal Photomultiplier Tube Housing for standard 1 1/8" side window photomultiplier
tubes. Requires side window PMT, and photometer/power supply for operation. Accepts Acton
tubes P1, P2 or P3 below, or customer specified 1 1/8” side window PMTs.
PD-439 Same as PD-438 above, also includes integrated light tight shutter.
P1 IP28 side window photomultiplier tube (or equivalent) for wavelength region 185-650nm.
Fits PD-438 or PD-439 housing.
P2 R928 side window photomultiplier tube (or equivalent) for wavelength region from
185-900nm. Fits PD-438 or PD-439 housing.
P3 R5108 side window photomultiplier tube (or equivalent) for wavelength region from
300-1100nm. Fits PD-438 or PD-439 housing.
ID-441 InGaAs Detector, includes pre-amplifier, uncooled version.
ID-441-C InGaAs Detector, includes pre-amplifier, cooled version, requires either Model 442-1 or
442-1A thermoelectric cooling for operation.
ID-442 Infrared Detection Assembly (PbS) with housing, power supply, and mounting flange for
SP-750i, for wavelength region from 1.1 - 2.9 microns. (Requires 442-2 preamplifier
or customer supplied pre-amplifier for operation).
442-1 Thermoelectric cooling for ID-441 or ID-442 detectors; includes direct temperature readout.
442-1 A Thermoelectric cooling for ID-441 or ID-442 detectors.
442-2 Preamplifier for ID-442 detection assembly.
ID-443 IR Detection Assembly (InSb) for 1.5 to 5.0 microns. Includes detector housing,
pre-amplifier, and Dewar.
25