Filter
Top Products
Main Menu
All functions of the SP-750i are accessed while the controller displays the Main Menu.
GOTO Menu:
Press the white key below the GOTO command. The following menu will appear (with a flashing arrow next
to the Enter Wavelength line):
Key in the desired wavelength (in nm) and then push the <ENTER> key (ex: 500 <ENTER>). The
SP-750i will then race at the maximum motor speed to the selected wavelength and display this
interim menu.
GOTO Interim Menu
11
Acton
SP-300
Wavelength= 0.0nm
Scan to 0.0nm
Rate= 100.0 nm/min
Grating #1 1200 g/mm
Jog Incr 1.00nm
GOTO SCAN SPEED GRAT TURR QUIT
Note: When entering a number for GOTO, SCAN or SPEED, the controller
will accept an integer or a number to the nearest tenth of a
nanometer (nm). If you enter a number with hundredths or lower, it
rounds up to the nearest tenth nanometer.
{ HOME } PRG
Go To:
Enter Wavelength
Acton
SP-300
Wavelength= 234.5nm
Scan to 500.0nm
Rate= 100.0 nm/min