Filter
Top Products
© 2007 PhilipsLighting Company.All rights reserved.
Printed in USA 08/07
P-5813-B
www.philips.com
Philips Lighting Company
200 Franklin Square Drive
P.O.Box 6800
Somerset,NJ 08875-6800
1-800-555-0050
ADivisionofPhilipsElectronicsNorthAmericaCorporation
Philips Lighting
281 Hillmount Road
Markham,Ontario
Canada L6C 2S3
1-800-555-0050
ADivisionofPhilipsElectronicsLtd.
Printedon chlorinefreepaperfromSappi Fine Papermills,who areaccreditedwith EMASenvironmental certification.
Sappiclaims that thepulp usedinthe manufactureof MagnoDullpaper is derivedfromenvironmentallycertified forests.
P
hilipsTuffGuard
™
H
igh Intensity Discharge
Coated Lamps—HPS Lamps
Ordering,Electrical andTechnical Data
Max.
R
ated Approx.
Product Nom. Pkg. Avg.Life Initial
Number Description Watts Volts Qty. Bulb Base (Hrs)
1
Lumens
2
Availability
20218-4 C70S62 12PKTG 70 52 12 ED-23
1
⁄2 Mogul 24,000 6500 Made to Order
2
0219-2 C100S54 12PKTG 100 55 12 ED-23
1
⁄2 M
ogul 24,000 9400 Made to Order
2
0220-0 C150S55 12PKTG 150 55 12 ED-23
1
⁄2 M
ogul 24,000 15,800 Made to Order
2
0222-6 C250S50 12PKTG 250 100 12 ED-18 Mogul 24,000 27,000 Stocked
20458-6 C50S68/M 12PKTG 50 52 12 BF-55 Medium 24,000 4000 Made to Order
20460-2 C100S54/M 12PKTG 100 55 12 BF-55 Medium 24,000 9500 Made to Order
1
)Average lifeunder engineeringdata with lampsturnedoffandrestartedonce every12operating hours.
2)Protective coating mayreduce actuallumensbyup to5%.
Above specifications aresubject to change without notice.
WARNINGS:
•Coating canwithstandbulb wall temperatures upto500°F,subjecttothe followingconditions:
1)Lamp mustbe installedandoperatedin ambienttemperature below150°F.
2)Lamp isnotused infixturethat doesnotallow heatdissipation.
RECOMMENDEDWARNINGS,CAUTIONS,AND OPERATING INSTRUCTIONS
ForHigh Pressure Sodium Lamps
R
“WARNING:
Theselamps must beoperatedinfixturesdesigned foruse withHighPressure Sodium
lamps.Thefixturewattage ratingmust match thewattageindicated ontheouter glassbulb.Donotscratch
theouter bulb or subjectit topressureas thiscouldcause theouterbulb tocrack orshatter.Apartialvacuum
inthe outerbulbmaycause glasstofly iftheglass isstruck.Operatingthe lampimproperly mayresult in
PERSONALINJURY,PROPERTYDAMAGE,BURNSANDFIRE.
1.If theouterglass bulbis broken,shutoffpowerimmediately andremovethe lampafterit hascooled.
2.Use onlyauxiliaryequipmentmeeting Philipsand/orANSIstandards.Use withinvoltage limitsrecommended
byballast manufacturer.
A.Operate lamp onlywithin specified limitsof operation.
B.Fortotalsupply loadreferto ballastmanufacturerselectricaldata.
3.Protect lampbase,socket andwiringagainst moisture,corrosiveatmospheresand excessiveheat.
4.Replace thelamp iftheouter glassbulbhas beenscratched,crackedor damagedin anyway.
5.Ifa lampbulbsupportisused,besure to insulatethe supportelectricallyso asto avoidpossible decomposition
ofthe bulbglass.
6.Donotusethis lampina fixturewhich redirectsasubstantial portionof the energy toward thearctube and
itsimmediate vicinity,asthis maylead toveryearlylamp failure.
7.Take careinhandling anddisposingof lamps.If arctubeis broken,avoidskin contactwithany ofthecontents
orfragments.
8.Thearc tubeofthis lampcontainssodium and mercury.Disposeof inaccordancewith federal,stateandlocal
requirements.
Made to order requires 3 week lead time
(No product returns on made to order lamps)