Filter
Top Products
P
hilipsTuffGuard
™
H
igh Intensity Discharge
Coated Lamps—Metal Halide Lamps
Ordering,Electrical andTechnical Data
M
ax.
R
ated Approx.
Product Nom. Pkg. Avg.Life Initial
Number Description Watts Volts Qty. Bulb Base (Hrs)
1
Lumens
2
Availability
20211-9 MH175/U12PKTG 175 132 12 ED-28 Mogul 10,000 14,700 Stocked
20212-7 MH250/U12PKTG 250 133 12 ED-28 Mogul 10,000 21,250 Stocked
21147-4 MS360/BU/EW 6PKTG 360 120 6 ED-37 Mogul 20,000 36,000 Stocked
20213-5 MH400/U6PKTG 400 135 6 ED-37 Mogul 20,000 36,000 Stocked
1)Average lifeunder engineeringdata with lampsturnedoffandrestartedonce every12operating hours.
2)Protective coating mayreduce actuallumensbyup to5%.
Above specifications aresubject to change without notice.
WARNINGS:
•Coating canwithstandbulb wall temperatures upto500°F,subjecttothe followingconditions:
1)Lamp mustbe installedandoperatedin ambienttemperature below150°F.
2)Lamp isnotused infixturethat doesnotallow heatdissipation.
•
UVradiationemitted from metal halide lampsmay deterioratethe coatingovertime.
•The coatingisnot designed tocontainan arc-tuberupture
•Under extremeconditionsglass fragmentsmayescape thecoating
•Only protectiveshrouded lampsareresistant tometalhalide non-passivefailure.
RECOMMENDEDWARNINGS,CAUTIONS,AND OPERATING INSTRUCTIONS
ForStandard MetalHalide Lamps(Enclosed Fixtures UnlessOtherwise Noted)
R
“WARNING:
Theselamps cancauseseriousskin burn andeyeinflammation fromshortwaveultraviolet
radiation ifouterenvelopeof thelampis brokenor punctured.Donot use where peoplewill remainfor
morethan afewminutesunless adequateshieldingor othersafetyprecautions are used.Certain lampsthatwill
automaticallyextinguish when theouterenvelopeis brokenor puncturedarecommercially available.”Thislamp
complieswith FDAradiationperformance standard21CFR subchapter J.(USA:21CFR 1040.30
Canada:SOR/DORS/80-381)
Ifthe outerbulbis brokenorpunctured,turnoff atonceand replacethe lamp toavoidpossible
injury fromhazardousshortwaveultraviolet radiation.Donot scratchtheouter bulborsubject
itto pressureas this couldcause theouterbulb tocrackor shatter.A partialvacuumin the
outerbulb maycause glassto flyifthe envelopeisstruck.
WARNING:Thearc-tubeofmetalhalidelampsaredesignedtooperateunderhighpressureandattemperatures
upto 1000ºCand canunexpectedlyrupturedue tointernal orexternal factorssuchasa ballastfailureor
misapplication.Ifthe arc-tuberupturesforany reason,theouterbulb maybreak andpiecesof extremely hot
glassmight bedischarged intothesurroundingenvironment.Ifsuch arupturewereto happen,
THEREISARISKOF PERSONAL INJURY,PROPERTYDAMAGE,BURNSANDFIRE.
Certain lamps thatwill retain allthe glassparticles should innerarc-tuberupture occur are
commercially availablefromPhilipsLighting Company.
RELAMPFIXTURESATOR BEFORETHEENDOF RATED LIFE.
Allowinglampsto operate untilthey failisnot advised andmayincreasethe possibilityofinner
arctuberupture.
CAUTION:TO REDUCETHE RISK OF PERSONALINJURY,PROPERTYDAMAGE,BURNSANDFIRERE-
SULTINGFROMANARC-TUBERUPTURETHE FOLLOWINGLAMP
OPERATING INSTRUCTIONSMUST BEFOLLOWED:
LAMPOPERATINGINSTRUCTIONS:
1.Turnofflampsat leastonceaweekforat least15minutesinsystemswhichareoperatingon acontinuousbasis
(24hours/day-7days/week).FAILURETOTURNOFF LAMPSFORTHEMINIMUM RECOMMENDED
TIMEMAYINCREASETHEPOSSIBILITY OFAN INNERARC-TUBERUPTURE.
2.RELAMPFIXTURESATOR BEFORETHEENDOF RATEDLIFE.Allowing lamps tooperateuntil
theyfail isnotadvised andmayincrease the possibilityof innerarctube rupture.
3.Beforelamp installation/replacement,shutpoweroffand allowlamp andfixtureto cool toavoidelectrical
shockand potentialburn hazards.
4.Useonly auxiliaryequipmentmeeting Philips and/orANSIstandards.Usewithinvoltagelimits recommended
byballast manufacturer.
A.Operate lamp onlywithin specified limitsof operation.
B.Fortotalsupply loadreferto ballastmanufacturerselectricaldata.
5.Periodicallyinspectthe outerenvelope.Replace anylamps thatshowscratches,cracks or damage.
6.Ifa lampbulbsupportisused,besure to insulatethe supportelectricallyto avoidpossibledecomposition of
thebulb glass.
7.Protect lampbase,socket andwiringagainst moisture,corrosive atmospheres and excessiveheat.
8.Timeshould beallowedfor lampstostabilize in colorwhen turnedon for the first time.Thismay require
severalhoursofoperation,withmore thanonestart.Lampcolor isalsosubject tochangeunder conditions
ofexcess vibrationor shockandcolor appearancemayvarybetweenindividual lamps.
9.Lampsmay require10to 20minutesto re-light ifthere isapowerinterruption.
10.Take careinhandling anddisposingof lamps.If anarctube isbroken,avoidskincontact withanyof the
contentsor fragments.
11.Donotuse this lamp:
A.In afixturethatcontains aPulseStartmetal halideballast.
B.Inafixture thatis specificallydesigned forusewith PulseStartmetalhalide lamps.Operation oftheselamps
onPulse StartMetal Halide systemsmay increasethechance ofanouter bulb ruptureand pieces of
extremelyhotglassmightbedischargedintothesurroundingenvironment.Ifsucharuptureweretohappen,
THEREISARISKOF PERSONAL INJURY,PROPERTYDAMAGE,BURNSANDFIRE.
Made to order requires 3 week lead time
(No product returns on made to order lamps)