Philips HF3451 Indoor Furnishings User Manual


  Open as PDF
of 76
 
Tip: We advise a light intensity between 9 and 20 (for the HF3451 with 75W lamp) or between 7 and
15 (for the HF3462/HF3461 with 100W lamp) for the alarm function. Set the light intensity to your
own preference by trying out the alarm function at different light intensity levels.
2 Ifyoudonotwantthelighttogoonatwake-uptime,selectlightintensitylevel0.
Quick alarm check
1 PresstheQUICKCHECKbuttontostartanacceleratedwake-upalarmtest(Fig.15).
ThelightringroundtheQUICKCHECKbuttongoeson(Fig.16).
Duringtherst50secondsofthetest,youseearapidincreaseofthelightintensitytothe
selectedlevel.Duringthelast40seconds,youheartheselectedsoundgraduallyincreaseto
theselectedlevel.
2 PresstheQUICKCHECKbuttonagaintostopthetest(Fig.15).
ThelightringroundtheQUICKCHECKbuttongoesout.
Note: The appliance continues to run the accelerated wake-up alarm test until you press the QUICK
CHECK button.
Switching the alarm on or off
The light ring round the ALARM button burns when the alarm is on. At the set time, the wake-up
sound is played and the lamp has reached the selected light intensity level.
1 Pressthe3buttontoswitchoffthelightandthewake-upsound.(Fig.17)
ThelightringroundtheALARMbuttoncontinuestoburn.Thealarmfunctionisstillactive
andthewake-upalarmwillgooffatthesettimeandwiththesetsoundandlightintensity
thenextday(Fig.11).
2 Pressthe#buttonifyouwanttoswitchoffthesoundwhenthealarmgoesoff.(Fig.18)
3 Pressthe@&buttonifyouwanttoswitchoffthelampwhenthealarmgoesoff.(Fig.19)
4 Ifyouwanttoswitchoffthealarmfunctionaltogether,presstheALARMbuttononeor
moretimesuntilthereisnosoundsymbolonthedisplayandthelightringroundthe
ALARMbuttongoesout.
Snoozing
1 PresstheSNOOZE/SCREENBRIGHTNESSCONTROLbuttontoswitchoffthesoundfor9
minuteswhenthealarmhasgoneoff(Fig.20).
The lamp continues to burn at the selected intensity level. After 9 minutes, the wake-up sound is
automatically played again.
2 PresstheSNOOZE/SCREENBRIGHTNESSCONTROLbuttonlongertodimthelight.
Note: You can only do this once. After you release the button, it functions as SCREEN BRIGHTNESS
CONTROL button again.
Note: You can only use the snooze function within 15 minutes after the alarm starts to go off. After those
15 minutes, the button no longer functions as SNOOZE button and only functions as
SCREEN BRIGHTNESS CONTROL button.
Adjusting the light intensity during the wake-up phase
1 Turnthelightadjustmentwheel@toselectahigherorlowerlightintensity.(Fig.14)
The lamp burns at the selected intensity during the rest of the wake-up phase.
Adjusting the brightness of the display
1 PresstheSNOOZE/SCREENBRIGHTNESSCONTROLbuttontoadjustthebrightnessof
thedisplay(Fig.20).
,
,
,
,
ENGLISH10
 previous next