Philips HF3451 Indoor Furnishings User Manual


 
Press the button again to set the brightness to another level. There are three levels.
Note: This button cannot be used to adjust the display brightness when the alarm goes off and during
snoozing.
3 button
1 Whenthealarmgoesoffatthesetwake-uptime,pressthe3buttontoswitchoffthe
wake-upalarmlightandsound.
Note: The alarm function remains active and the light ring round the alarm button continues to burn.
2 Whenyouhaveswitchedonthereadinglampand/ortheradio,pressthe3buttontoswitch
offthereadinglampand/ortheradio.
When you press the
3 button again, only the light goes on.
Note: When the alarm function is active, pressing the 3 button does not affect the alarm settings.
Reading lamp
1 Pressthe@&buttontoswitchthelamponoroff.(Fig.19)
2 Turnthelightadjustmentwheel@upwardsordownwardstoincreaseordecreasethelight
intensitylevel.(Fig.14)
Thelightlevelindicationonthedisplay
@showsthelightintensitylevel(00to20).(Fig.21)
Tip: We advise you to set the light intensity to 20 (maximum level) for reading. If this light level is not
strong enough, switch on an extra lamp.
Donotforgettosetthelightintensitylevelbacktothewake-uplevel!
Radio (HF3462/HF3461 only)
1 PresstheRADIObuttontoswitchontheradio(Fig.22).
Thelightringroundthebuttongoeson(Fig.23).
2 Usethe%andthe^buttonstoselectthefrequencyofyourfavouritestation.(Fig.24)
You can choose FM stations.
3 Youcanusetheexternalantennaforbetterreception.Inserttheexternalantennaintothe
antennasocketnexttosymbol
òonthebackoftheappliance.
4 PresstheRADIObuttontoswitchofftheradio(Fig.22).
Power failure
To make sure the alarm goes off at the set time after a short power failure, the appliance has been
provided with a backup system. This system has a self-charging battery that does not have to be
replaced. The system remembers the time for a few minutes.
Afteralongpowerfailure,thedisplayshowsanincorrectclocktimeandthealarmtimeis
00.00.Setthecorrectclocktime(seechapter‘Preparingforuse’)andthecorrectalarmtime
(seechapter‘Usingtheappliance’)(Fig.5).
Reset
1 Iftheappliancedoesnotrespondwell,removetheplugfromthewallsocketandthen
reinsertit.Ifthisdoesnothelp,presstheresetbuttononthebottomoftheapplianceto
resetthedisplaytothefactorydefaultsettings(Fig.25).
Cleaning and maintenance
Alwaysunplugtheapplianceandletitcooldownforapprox.15minutesbeforeyoustart
cleaningit.
,
,
,
ENGLISH 11