Filter
Top Products
6 Put lter 3 (activated carbon lter) back into the appliance.
7 AC4004 only: attach lter 2 (multi-care lter) to the back of lter 1
(pre-lter).
Note: Make sure that the front of lter 2 (multi-care lter), that is the side with
the tag, points towards the pre-lter.
8 Place lter 1 (pre-lter) in the appliance.
Note: AC4004: make sure the multi-care lter is attached to the back of the
pre-lter.
Note: Make sure that the side with the two projections points towards you.
Note: Make sure that all hooks are properly attached to the appliance.
9 To reattach the front panel, insert the two hooks into the top of
the appliance rst (1). Then push the panel against the body of the
appliance (2).
1 Put the plug in the wall socket
, All lights go on and off twice and you hear a beep.
2 Press the on/off button to switch on the appliance.
2
1
10