Filter
Top Products
4:13
21
Sewing mode
23
Sensormatic buttonhole
When you sew a buttonhole with the Sensormatic
buttonhole foot, adjust the slit length (23) so that
it is slightly larger than the size of the button. You
can measure your button using the button ruler on
the lid.
Set the slit length and make sure that the red arrow
line up with the marking on the foot. Start sewing
by pressing the foot control or start/stop button.
The buttonhole will be completed automatically
and the threads are cut. You can repeat the
buttonhole as many times as you wish.
Manual buttonhole
To sew a manual buttonhole, use presser foot
5M. Sew the fi rst column as long as you want the
buttonhole. Touch the reverse button. The machine
sews the bartack and the second column. When the
columns are aligned, press the reverse button to
sew the second bartack.
Repeat a manual buttonhole (21)
When you have adjusted your buttonhole, use the
repeat buttonhole function (21), to sew identical
copies. As long as that icon is selected, the machine
will repeat the buttonhole over and over again.
Repeat buttonhole is only visible when sewing a
buttonhole manually.
To cancel the function, just deselect the icon.
The repeat function will also be cancelled if any
adjustments are made.