Filter
Top Products
Care and maintenance
32
10.04.02 Parameter list for drive system MD-4-58-220-CE
Parameter
Description
Setting range
Set value
1
Speed max. 50 - 9999
▲
4
Speed for start backtackl 50 - 8000 1500
5
Speed for end backtack 50 - 8000 1500
46
Rotating direction of the motor CW - CCW CW
47
Selected machine class 0 - 101 62
61
Cutting speed 1 50 - 500 220
81
Needle position 6 (start cutting signal 2) 0 - 360° 40°
84
Needle position 5 (end cutting signal 1) 0 - 360° 90°
85
Needle position 9 (start thread tension
release/start thread catcher)
0 - 360° 120°
87
Tension release after thread lever position at t.d.c. 0 - 1500ms 20ms
179
Needle position 2 (take-up lever raised) 0 - 359° 83°
181
Needle position 1 - needle lowered (192 = off) 0 - 255 250
210
Switch on angle for thread trapper 0 - 359° 20°
211
Switch off angle for thread trapper 0 - 359° 90°
236
Machine version
2 = 581 + 583
0 - 4 2
See Chapter 3 Specifi cations
*
Adjustment see Chapter 8.05 Basic position of the machine drive unit.