Filter
Top Products
Installation and commissioning
21
8.01.06 Mounting the spool holder
● Mount the spool holder as shown in
Fig. 8-08.
● Insert the spool holder into the hole in
the table top and fasten it with the nuts
enclosed.
Fig. 8 - 06
Fig. 8 - 07
8.02 Connecting the plug-in connections and earth cables
1
● Connect all plug connections as described in the operations manual of the drive
● The following ground cables must be attached in order to discharge static electricity.
● Attach ground cables for machine, main switch, control unit and motor to ground point 1.