Filter
Top Products
10 - 1
Care and maintenance
10 Care and maintenance
10.01 Maintenance intervals
Clean the entire machine .............................................................................. once a week
Clean the hook compartment.................... once a day, or more often if in continuous use
Oil the machine ............................................................................................. once a week
Oil the hook race ................when commissioning the machine and after long downtimes
Oil the head parts (felt).......when commissioning the machine and after long downtimes
During all cleaning work the machine must be disconnected from the power
supply by switching off the main switch or pulling out the plug!
Danger of injury if the machine is started accidentally!
10.02 Cleaning the machine
The cleaning cycle required for the machine depends on following factors:
● Single or several shift operation
● Amount of dust resulting from the workpiece
It is therefore only possible to stipulate the best possible cleaning instructions for each indi-
vidual case.
For all cleaning work the machine must be disconnected from the mains by
switching off the on/off switch or by removing the mains plug!
Danger of injury if the machine suddenly starts up .
To avoid breakdowns, the following cleaning work is recommended for single shift operation:
● Clean hook compartment and needle area of sewing head several times daily.
● Clean the entire machine at least once a week.