Filter
Top Products
8 - 5
Installation and commissioning
8.01.08 Fitting the reel stand
● Fit the reel stand as shown in Fig. 8 - 08.
● Afterwards insert the stand in the hole in
the table top and secure it with nuts pro-
vided.
Fig. 8 - 08
8.01.07 Mounting the top V-belt guard
Fig. 8 - 07
● Take out screws 1 and 2 and remove balance wheel cover 3.
● Fasten belt guard 4 with screws 5.
● Fasten belt guard 6 with screws 7.
● Reattach cover 3 with screws 1 and 2.
2
1
4
5
3
7
5
5
7
6