Filter
Top Products
9 - 6
Setting up
9.06 Adjusting the stitch length
● Set the desired stitch length with
adjustment wheel 1.
Fig. 9 - 09
9.07 Entering start and end backtacks (only on machines with Quick motor)
● Switch on the machine.
● If necessary switch off the "darning seam" or "counted seam" function.
● Select the values for the number of stitches by pressing the corresponding +/- keys:
A = number of forward stitches for the start backtacks
B = number of reverse stitches for the start backtacks
C = number of reverse stitches for the end backtacks
D = number of forward stitches for the end backtacks
● Switch on the corresponding functions by pressing the start backtacks and /or end
backtacks key (arrow appears opposite the corresponding function key).
ABCD
5555
1